3 in 1 2KG Vacuum Casting Machine 1500W 2012F Digital Display

Description:

▲FAST MELTING: Gold Melting Furnace Line Seal All-In-One combines melting, vacuuming and casting in one machine, which can be heated quickly up to 1100°C, melting metals with melting point below 1100°C in 48 minutes. It is suitable for making gold nuggets, ingots or jewellery.

▲VACUUM COVER AND BUILT-IN FUEL TANK: The vacuum cover is made of thick aerospace plastic, which helps to minimise burrs and air bubbles. The built-in refuelling device can adjust the refuelling volume with reference to the standard line.

▲DESIGN AND CONSTRUCTION: Heavy-duty structure, reasonable layout and easy operation. Comfortable handle and rubber feet.

▲PRECISE PRESSURE GAUGE: Monitoring the current pressure can help you make relevant adjustments as needed to form a smooth surface.

▲SCOPE OF APPLICATION: Wide range of uses for the fusion die casting machine, ideal for jewellery processing factories and art manufacturers to make high-density and beautiful jewellery, melting recycled scrap, refining jewellery, casting all kinds of fast-melting metals including gold, silver, lead, copper, brass, bronze, aluminium and so on.

Product Specification：

Type:Vacuum Casting Machine

Model: JH3-004

Power: 1500W

Voltage: 110V

Max melting capacity: 2KG

Max heating temperature: 1100°C

Product Size: 41.6x36.5x29.6cm/16.4*14.4*11.7in

Package size: 50*51*47cm/19.6*20*18.5in

Weight: 20kg/44.1 lbs

Package includes：

1x Jewellery Melting casting machine

1x Steel bell

1x Crucible

1x Power cable

1x Air filter

1x Graphite gasketRubber base

1x Vacuum cover

1x Crucible tongs

1x Air compressor cable

1x Gloves

1x Instruction manual

NOTES：

1.Do not continuous melting casting, every two furnace interval time 40-50 minutes, the amount of more recommended to prepare several crucible rotation. 2, The melting point can not exceed 1100 ℃, commonly used precious metals are within this range, casting casting is the most important part of the process.

2. The melting point can not exceed 1100℃, commonly used precious metals are within this range, casting temperature can be set, according to the actual situation, do not exceed the melting point too much, so as not to increase unnecessary load.
3. Do not melt and cast metals with high impurities, such as sand gold.
4. Pour out immediately after melting

5.This product is designed for the primary processing of hand-made jewellery. Please read the instructions carefully. If it is necessary for continuous production or mass production, it is recommended to use large power melting casting equipment.

6.Please allow the slight colour difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.